Pathway Internal Vaginal/Rectal Sensor PG-6320

sEMG Biofeedback, sEMG Accessories, Sensors, Internal

Pathway Internal Vaginal/Rectal Sensor PG-6320

SKU: PG-6320

$38.00

Internal Vaginal/Rectal sensor for Pathway System Configurations, Patient Units, and other sEMG biofeedback systems only.  This sensor is designed as a single patient multi use sensor and cannot be used in between patients.

For clinicians referring patients for this product, please click here to download our Rx Pad.

Web ID: 427

Quantity

Internal Vaginal/Rectal sensor for Pathway System Configurations, Patient Units, and other sEMG biofeedback systems only.  This sensor is designed as a single patient multi use sensor and cannot be used in between patients.

The internal Vaginal/Rectal Sensor sensor has a tab for insertion identification.  The tab should be facing up towards the pubis in order to achieve the desired placement.  The internal Vaginal/Rectal Sensor sensor is without a bulb at the end which could cause expulsion for those patients who are extremely weak or have a prolapse.  It is recommended that the clinician choose a PG-6330 or PG-6340 sensor if the possibility of expulsion exists.

The internal Vaginal/Rectal Sensor sensor has three elongated nickel contact points, these contacts act as your two active and one reference electrode during sEMG biofeedback training.  The length and width of the contacts is not suitable for Pelvic Floor Stimulation and is not approved for it’s use.

As a single patient multi use item, clean up is simple.  The recommended cleaning for the sensor is soap and water and let the sensor air dry.  For infection control purposes it is recommended that the clinician not store the sensors for individual patients in the clinic.  Patients should take their sensors with them and bring them back to the clinic for their next visit.

This internal Vaginal/Rectal sensor will directly connect to the Pathway CTS systems through port A of the device and be used through that port to record sEMG biofeedback.  The sensor will also connect to the Pathway MR and TR series sEMG instrumentation through the use of the PG-3660 adapter.  It is designed to directly input into the PG-STM-10 and can be used in conjunction with the liberty PFS unit with the use of the PG-3700 adapter.

This product does not contain any rubber or latex materials.

Weight 0.487469 lbs